16 PIN Multi OBD II Bmw Diagnostic Tools With Usb Dongle
1.Operating Temperature: -20 to 70 °C ( -4 to 158 °F )
2. Storage Temperature: -40 to 85 °C ( -40 to 185 °F )
3. Diagnostic Interface: 16 PIN
4. USB Interface: USB 2.0
5. Power: DC 5 V - 12 V
6. Consumption: 1 W
7. Dimensions: Length 95 mm, Width 49 mm, Height 28 mm
Powerful than AK300!!!
for BMW Multi Tool includes forth parts, hardware device, dongle,
programmer, software. Before running software you must connect
dongle and hardware device to computer.
1. OBD II CONNECTOR: Connects the tool to the vehicle's Data Link
2. Dongle: USB dongle.
3. USB CONNECTOR: Connects the tool to the PC/Laptop through USB
4. Programmer: Program keys.
5. Programmer Female Pin: Connects programmer to device.
6. Programmer Male Pin: Connects programmer to device.
FOR BMW MULTI TOOL supported function including:
1. Car access sytem dentification
2. Read/Write CAS EEPROM(OBDII)
3. Read/Write KM stored in CAS system(OBDII)
4. Read/Write synchronization codes stored in CAS system(OBDII)
5. Synchronize DME and CAS(OBDII)
6. Synchronize CAS and ELV(OBDII)
7. Prepare dealer key for CAS1/CAS2/CAS3/CAS+(support latest CAS3
8. Read/Restore CAS KEY information(OBDII)
9. Disable/Enable key with working key(OBDII)
10. Clear DTC and Shadow (OBDII)
11. Prepare dealer key with CAS eeprom dump
12. Unlock dealer key prepared with our software with CAS eeprom
dump or KEY information
13. Change KM in CAS and instrument dashboard with file dump
14. Have key programmer, you can programm dealer key directly.
Pay attention to the function: Help->Device update. You can get
the latest software version and firmware verion when you can access
- Tool: you can choose language here, support "English" and
"Chinese Simplified" Restart software to apply your settings.
- File Make Key: you can prepare dealer key with EWS and CAS EEPROM
- Help: Device update. You can get your device and dongle id
version and update it.
2. Protocal type:
Now BMT support there type of protocol: KWP-CAN BUS 100Kbps,
KWP-CAN BUS 500Kbps, KWP-2000. "Auto Detect " function can help you
to choose the right protocol. After choose protocol okay, then
press "Connect". If connected success. All CAS info will display in
CAS Identification. Include CAS number, VIN, production date, etc.
3. EEPROM Function:
Read EEPROM, Write EEPROM, Save File, Load File…
1). You should backup the CAS EEPROM before prepare dealer key.
After succeed read EEPROM, please save it as back file. This step
is very important.
2). Now can't read the whole EEPROM for cas3 system. But the main
section is contained. It should be saved. When you read CAS EEPROM,
it will give tips (Press ok to continue).
Support read and change KM stored in CAS system.
Don't support to change KM in instrument. If you want to change the
KM display in instrument. You should change KM in CAS system first.
Then modify the KM in instrument manually.
5. Synchronization Codes:
1). CAS3 code-DME, CAS3code-EGS: Read and write DME and EGS code
stored in CAS3 system.
2). Synchronize DME and CAS— this function will be useful while
prepare dealer key or any other operation which cause can't start
3). Synchronize CAS and ELV — this function can help clear wheel
6. Key Learn
1). Get Key Info: With this function you can get the key cutting,
remote frequency, and key data.
2). Save Key Info: Save the read key info.
3). Load Key Info: Load the saved key info. To see the key data and
prepare for write key info.
4). Write Key Info: Write the loaded key info into CAS system.
5). Make Dealer Key: You can prepare dealer key after you get key
info successfully. Also you should choose the key position.
6). Add key: Add the new dealer key into CAS system. Some CAS
system needs this step to start the engine.
7). Enable Key: Insert the current key into ignition switch, press
"Enable Key". The key after current key will be enabled.
8). Disable Key: Insert the current key into ignition switch, press
"Disable key". The key after current key will be disabled.
9). Clear DTC: Before prepare dealer key and after it you can use
this function to clear DTC.
10). Clear Shadow: Before prepare dealer key and after it you can
use this function to clear Shadow.
7. File Make Key
1). Choose CAS or EWS type.
2). Load the choose EEPROM file you will get the make dealer key
3). Choose key position and press "Make Dealer Key" button. Flow
the given tips to prepare dealer key. After succeed you can save
the new EEPROM dump file.
- For EWS1, EWS2, EWS3, EWS4, CAS1, CAS2, CAS3 type the prepared
dealer key can start the engine directly.
- For some CA3+ type you need to write back the new dump file into
4). CAS3 encrypt data, only OBDII prepare make key is support for
CAS3 encrypt data.
1) We accept Alipay, West Union, TT. All major credit cards are
accepted through secure payment processor ESCROW.
2) Payment must be made within 3 days of order.
3) If you can't checkout immediately after auction close, please
wait for a few minutes and retry Payments must be completed within
1) WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2) Orders processed timely after the payment verification.
3) We only ship to confirmed order addresses. Your order address
MUST MATCH your Shipping address.
4) The images shown are not the actual item and are for your
5) SERVICE TRANSIT TIME is provided by the carrier and excludes
weekends and holidays. Transit times may vary, particularly during
the holiday season.
6) If you have not received your shipment within 30 days from
payment, please contact us. We will track the shipment and get back
to you as soon as possible with a reply. Our goal is customer
7) Due to stock status and time differences, we will choose to ship
your item from our first available warehouse for fast delivery.
1) You have 7 days to contact us and 30 days to return it from the
date it was received. If this item is in your possession more than
7 days, it is considered used and WE WILL NOT ISSUE YOU A REFUND OR
REPLACEMENT. There are NO EXCEPTIONS! Shipping cost is bear by both
seller and buyer in half.
2) All returned items MUST BE in the original packaging and you
MUST PROVIDE us with the shipping tracking number, specific reason
for the return, and your po#.
3) We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the
item in its original condition and packaging with all components
and accessories included, AFTER BOTH Buyer and Seller cancel the
transaction from aliexpress. OR, you may choose to have a
4) We will bear all the shipping cost if the product(s) is (are)
not as advertised.
1) Buyer's early confirmation will be highly appreciated after
receiving the items.
2) Since your feedback is very important to our business's
development, we sincerely invite you to leave positive feedback for
us if you are satisfied with our product and service. It'll just
take you 1 minute,but this 1 minute has the extremely vital
significance to us.
3) Please contact us before leaving any negative or neutral
feedback. We will work with you to solve any problems.Thank you for
1) 12 months Manufacturer`s limited Warranty for defective items
(excluding items damaged and/or misused after receipt). Accessories
come with a 3-month warranty.
2) Defective items MUST BE reported and returned within the
warranty period (and in the original packaging, if possible). You
must tell us what the defect is and give us your order number. WE
DO NOT REPAIR OR REPLACE ITEMS WITH AN EXPIRED WARRANTY.