Water-base Permeable Abrasion Resistant and Moisture Proof
Reinforce Agent M139
For mortar floor, concrete base reinforcement, with moisture-proof,
mildew-proof, flame retardant and other characteristics.
Aqueous polymer emulsion;
Super permeability, used for base reinforcement;
Reduce the absorbency of the base;
Economical and practical, convenient construction.
Water-based emulsion interfacial reinforcing agent is used for the
ground absorbing base course, such as concrete, cement mortar, etc.
It has super penetrating force for the base course with a lightly
sanded surface, to enhances the strength of reinforcing base
course. At the same time, M139 can closes the capillary hole and
gap of base course, reduces the absorbing ability of porous base
course. It has certain effect of moisture proof. After the
reinforcement of the base can carry out the construction of
self-leveling leveling layer.
Base treatment: the base needs to have porous absorption, flat,
dry, clean, no cracks, no oil stains, mold release agent and other
chemical additives. Loose remains or surface must be thoroughly
removed by washing or shot-blasting.
Subfloor should be hard, smooth, dry, clean, no cracks, no fat, no
release agent. If the surface of the base is loose or a large area
of sand, shot blasting is recommended. Before brush the agent, use
a sander and vacuum cleaner to clean up the subfloor.
Remove unstable objects and oil on the surface of the ground；Add
water 1:1 to this reinforcing agent and paint it with roller brush
to ensure complete penetration; Completely dried product need brush
the second time, if you want to get better enhancement effect,
brush more times. Please note that in other climates, the drying
time will be extended or shortened.
Suitable service temperature: 5℃-35℃. The base course needs to be
smooth and dry, and the surface should be cleaned before
construction. It is not recommended to use it outdoors. This
product is slightly corrosive to steel reinforcement, so be careful
use it. This manual data from 23 ℃ plus or minus 2 ℃ temperatures
and 50-55% relative humidity conditions.
Packaging and Storage:
20kg plastic pails. The product shall be kept at room
5℃-35℃,prevent freezing and exposure. The shelf life is 12 months.