Human Body Wireless LED Night Light With Sensor Control OEM Service
1) Magnets can adsorb any place with iron.
2) Strong 3M glue fixation.
Battery: Use 3AAA or USB plug . (Note: USB can only be plugged in
and does not charge batteries directly).
installation: Before installing the 3AAA battery, open the rear
cover, then open the
battery cover, install the rear cover, and tighten the rear cover.
Lighting: This product is divided into scenario mode (Color) and
white light mode (White). If
white light mode is used, please switch the switch to White
Mode: This product has constant brightness mode (On), night
induction mode (Auto) and close (Off). If you use night induction
mode, switch the switch to Auto position to meet different needs.
|Mini Motion Sensor Night Light|
|night light,sensor light,closet light|
The main color
|White (can do any color as customer request)|
Lamp body material
|CE ROHS FCC|
|White light or customized|
Sample Lead Time
|30% in advance ,balance against shipping documents|
Power of light source: 1W
Input voltage: DC 4.5V or 5V
Protection level: IP34
Sensor distance: 0m-4m
Illumination delay: less than 20s + 5S
Working current: less than 120mA Working current: less than 120mA
Standby current: less than 0.5mA
Optical control circuit: ambient illumination is less than 1Lux,
into standby mode.
Light source material: LED
Color temperature value: 2820K-3200K
Maximum luminous flux: 45Lm
Working temperature: -5 C ~ 50 C
Storage temperature: -5 C ~ 50 C
Sensor mode works only in dark environments.When the battery power
is low, the sensor will become dull, please replace the battery in
time; when not used for a long time, please remove the battery.