Safety Heavy Duty Grip Tape Indoor and Outdoor Stair Treads Safety
The Stair Treads Safety Tape is warning tape covered with quartz
sand or aluminum oxide, which is widely used in warehouse, factory,
office, school, construction sites and many other places.
It is made of high quality PVC or PET, quartz sand or aluminum
oxide and pressure-sensitive adhesive, which is waterproof and
It has several colors and suitable for different places.
It can be sticked on the floor, stairs to avoid anti-skidding when
High quality adhesive of superior viscidity and weatherproof
Grips firmly improves traction in both wet and dry areas, withstand
outdoor weather conditions;
Adheres well on concrete, metal, plastic, wood, tile, stone,
laminate, mats, or carpet;
Easy to install and does not leave any residue, not will it damage
delicate surface if you want to remove it.
Reduce the risk accidents on slippery, unenven or split level floor
surfaces with a textured nonslip tape.
Indoor & Outdoor Grip Tape
Prevent slipping and falling with an easy application anti-slip
tape. Works perfect for stairs, marble, concrete, stone, wood
floors, fiberglass decks, boats, warehouse floors, patios, porches,
bricks, steps, etc. Prevents falls and slips in
commercial/industrial locations, indoors/outdoors areas.
|Adhesive||Solvent acrylic||Solvent acrylic|
|Material||PVC+Quartz sand||PET - Emery|
|180° Adhesion to steel||≥7.92N/25mm||≥7.961N/25mm|
|Common temperature||0-80 ºC||0-80 ºC|
|Name||Safety Heavy Duty Grip Tape Indoor and Outdoor Stair Treads Safety
|Brand||EONBON / OEM|
|Color||Black, Yellow, Brown, Black Yellow, etc.|
|Feature||Heavy duty / Weather proof|
|Size||10cmx5m/5cmx5m/2.5cmx5m or as your request|
|Material||PVC / PET / Aluminum Oxide|
|Leading time||Regularly 7 days after receipt of deposit and all details confirmed|
|Payment||T/T, 30% deposit, 70%balance before shipment or L/C at sight|
|Package||shrinked for each roll and then packing by paper carton or as your
Directions, Easy Installation
1. Please make sure that the surface is clean, dry, smooth and free
of oil or other substance before application;
2. Peel-off the backing liner and apply. If the temperature is low,
slowly heat the tape with a hair dryer;
3. Fix the tape on the surface with a decorating roller or rubber
hammer to get a good result;
4. Allow 24 hours to dry before heavy use, to make sure the tape
stick well with the surface.