10600nm Co2 Fractional Laser Machine For Acne Scars , Vaginal
1. Fractional resurfacing is a new laser treatment modality that
creates numerous microscopic thermal injury zones of controlled
width, depth,and density that are surrounded by a reservoir of
spared epidermal and dermal tissue,allowing for rapid repair of
laser-induced thermal injury. This unique modality, if implemented
with proper laser- delivery systems, enables high-energy treatments
while minimizing risks.
2. This machine use the RF Tube manufacturerd by Coherent
America,the frequency can reach more than 5000HZ,the high speed can
work more efficiecnt and effectively,it is very good for the ultra
pulse incision for the precise surgey,no blood,the treatment area
is very clear,andless down time.
How Does Vaginal Treatment Work?
Vaginal tightening laser is the use of water uptake 10600nm gold
standard laser, using a three-dimensional lattice technology and
360-degree circular emission perfect combination of technology, to
produce 50-70 degrees Celsius in a controlled depth of the vaginal
mucosa,stimulate lamina propria and myometrium newborn fibroblasts,
and damaged collagen fibers,elastic fibers, such as restructuring,
so as to achieve vaginal wall thickening and tightening of the
vagina so that firmness, sensitivity enhancement, vagina tight as
1. Skin renewal and regeneration
2. Remove all kinds of wrinkles
3. Remove acne and scars
4. Remove neoplasms
5. Remove pigment
7. Sun damage recovery and skin renewing
8. Actenic keratoses
9. Face lift, tighten and whiten skin
10. Pierce ears
11. Effective treatment with skin hydroponic, skin rough
12. To eliminate body odor
13. To remove wart
|Cosmetic Application||Rhytides (Wrinkles)||Medical Application||Actinic keratosis (sun-damaged skin, precancerous lesions)|
|Mottled dyspigmentation||Seborrheic keratosis (sun-damaged skin, precancerous lesions)|
|Telangiectasia (RedSpots)||Sebaceous hyperplasia (yellow, shiny bumps on the face)|
|Solar lentignes (brown spots)||Rhinophyma (nose swelling and tissue over growth|
|Large pores, Rough skin texture||Epidermal Melasma (Brown spots)|
1. RF Laser Tube is more stable than traditional Glass tube, the
machine is non serviceable
2. With the RF laser Tube, the scanning depth can reach the derma
layer ,to accelerate the collagen re-growth.
3. RF Laser Tube makes the scanning dot much thinner and less harm
4. The Laser Tube frequency can reach more than 5000HZ, high
scanner can get better treatment effect
5. Four working modes ,Fractional, CW, Pulse, Ultra Pulse ,one
machine can been used in widely in different surgery
6. Special designed energy self-inspected and energy-replenishment
system, improving the stability and effect
7. Multi safety protection, water, electric ,remote interlock
8. Laser anti-leak designing, confirm the operator and client
9. Whole low voltage system, no electric danger and no electric
|Laser sourse||American RF Laser Tube|
Continuous Wave Mode (CW)
Pulse Mode (single and repeated)
Ultra Pulse Mode
|Power of laser generator||Max 60W|
|Focus Diameter||≤0.1-1.2 mm|
|Treatment Depth||Max 2mm|
|Aiming Beam||Red Diode laser (650nm,≤5mW)|
|Delivery System||7-Articulation Joint Spring Arm|
|Scanning Area||Max 20×20mm|
Ellipse, Rectangular, Triangular,Line
Middle split Mode
|Smoke Exhausting System||Built-in air blow|
|Cooling system||Air Cooling|
CO2 Laser Q & A
Q: WHAT IS CO2 LASER RESURFACING?
A: CO2 Laser Resurfacing is a laser treatment that addresses sun
damaged skin, uneven pigmentation, wrinkle reduction, pore size
reduction. CO2 Laser Resurfacing also targets loose skin while
brightening under eye circles and helps with healing acne and acne
Q: HOW DOES CO2 LASER RESURFACING WORK?
A: CO2 Laser Skin Resurfacing uses energy to vaporize aged or
damaged skin while also stimulating new collagen growth to the
Q: WHO ARE GOOD CANDIDATES FOR LASER CO2 RESURFACING?
A: The best candidates for CO2 Laser Resurfacing are patients with
a light skin tone, skin types 1 through 3. Skin type can be
determined by a doctor or aesthetician.
Q: WHAT AREA CAN BE TREATED WITH THE CO2 LASER?
A: The most common areas to treat with the CO2 Laser are the face,
neck and hands. Other areas can be treated depending on the
patients and their needs. Treatment areas will be discussed during
a pretreatment consultation.
Q: HOW MANY LASER CO2 RESURFACING TREATMENTS WILL IT TAKE TO
ADDRESS MY CONCERNS?
A: The amount of treatments is decided on an individual patient
basis. It may take as little as one treatment or up to six
treatments to obtain maximum results. The number of CO2 Laser
treatments needed is discussed during a pretreatment consultation.
Q: HOW LONG DO CO2 LASER RESURFACING TREATMENTS TAKE?
A: The entire face can be treated by the CO2 Laser in as little as
30 minutes. The total treatment time can vary depending on topical
application and the number of laser passes needed for treatment.
Q: WHAT CAN I EXPECT TO FEEL DURING A CO2 LASER RESURFACING
A: Topical anesthetic is applied before the CO2 laser treatment to
make the procedure virtually painless. Minimal discomfort may be
felt but it is overall very tolerable.
Q: WHAT SHOULD I DO TO PREPARE FOR MY CO2 LASER RESURFACING
A: It is very important to avoid sun exposure pre CO2 laser
treatment. This includes use of tanning beds and application of
self-tanners. Patients should use a lightening cream, such as
hydroquinone, 1-2 weeks prior to CO2 laser treatment. Patients are
advised to start an antibiotic 1 day prior toCO2 laser treatment.
Q: SHOULD I EXPECT ANY DOWNTIME AFTER MY LASER CO2 RESURFACING
A: Downtime post Laser CO2 Resurfacing treatments is dependent on a
number of different factors. Downtime should be expected and can
better be addressed during your pretreatment consultation.
Q: HOW SOON WILL I SEE RESULTS AFTER MY LASER CO2 TREATMENT AND HOW
LONG WILL MY RESULTS LAST?
A: Immediately following your Laser CO2 Resurfacing treatment, your
body will naturally start working by replacing aged tissue cells
with new ones. Shortly after your procedure you will notice your
skin to be visibly smoother, healthier, and younger looking. Laser
CO2 Resurfacing results will continue to improve over the next 6
Q: WHAT POST-TREATMENT CARE IS NEEDED FOLLOWING MY LASER CO2
A: There is a list of post-procedure care instructions that will be
reviewed at the time of your consultation. Patients will also
receive a copy of take home instructions. These instructions
include proper times to ice, apply ointment, a list of medication
to take, and if and when you should contact a doctor.
Xi'an Taibo Electronic Technology Co., Ltd. takes the leading in
applying advanced laser and Intense light technology in beauty
industry. Now we developed IPL series, E-light, Co2 fractional
laser, 808nm diode laser, ultrasonic cavitations, fractional RF and
hair re-growth laser, 980nm diode laser, cryolipolysis, lipo laser,
water oxygen jet peel system, etc.
With efficient R & D team, mass production ability and reliable
quality control system, Our company offer OEM&ODM service and
help our clients build up their own reputation and more competitive
in the market. All the process of the producing is under ISO13485
Quality system and match with CE certification request.
RoomB-605 Haibo Plaza FengCheng 9 Road Xi’an Shaanxi Province
Company: Xi'an Tai Bo Electronic Technology Co. Ltd.