Sign In | Join Free | My hardware-wholesale.com
hardware-wholesale.com
Products
Search by Category
Home > Flow Measuring Instruments >

IEC60695-11-5 Flammability Tester Needle Flame Tester

Categories Flame Test Equipment
Brand Name: KingPo
Certification: Calibration Certificate
Place of Origin: China
MOQ: 1
Price: To be quoted
Payment Terms: T/T
Packaging Details: safety carton pack or plywood box
Delivery Time: 30 working days
Supply Ability: 3 sets per month
Model Number: KP-FT03
needle-shaped burner: higher than 35mm
stainless steel pinhead: Φ0.9mm-Φ0.5mm
burner angle: 0°、45°adjustable
flame height: 12mm ± 1mm
ignition gas: butane or propane with more than 95% purity
test temperature: 0~1000℃
  • Haven't found right suppliers
  • Our buyer assistants can help you find the most suitable, 100% reliable suppliers from China.
  • And this service is free of charge.
  • we have buyer assistants who speak English, French, Spanish......and we are ready to help you anytime!
  • Submit Buying Request
    • Product Details
    • Company Profile

    IEC60695-11-5 Flammability Tester Needle Flame Tester

    Needle Flame Tester


    Brief Introduction


    Needle Flame Tester is a simulation experiment project using non-flame ignition source in accordance to standard requirements of IEC60695 -11-5,GB/T5169.5-2008,GB4706.1-2005 ,etc.

    Needle Flame Tester uses Needle-shaped burner in required size (Φ0.9mm ) ;transport butane gas into it ,ignite the specimen at a regular time and angle of 45° ,to check whether the specimen ignite ,lasting ignition time and combustion length to test the ignition fatalness of devices inside because of flammule caused by breakdown.

    Needle Flame Tester is suitable for research,production and quality testing department of electrical devices and component parts like lighting equipment,low voltage apparatus,household appliance,machine tool electric appliance,motor-driven machine,electric tool,electronic instrument,electrical connectors and accessories;also suitable for insulating material,engineering plastic and other solid combustible material industry.


    Characteristics:

    With predetermined size (Φ 0.9 mm) needle burner, in 45°angle burning product,measure the fire risk by product light-off or hold burning time.


    Technical parameters:

    Needle burnerinner hole diameter Φ 0.5mm ± 0.1mm, Diameter,9mm≤Φ, length ≥ 35mm, stainless steel
    Burner angle0,° 45° (adjust flame height)
    ThermocoupleØ0.5mm Type K (Ni/Cr - Ni/Al), armored sheath can withstand temperature-40°C~ 1100°C
    Burning time0-999.9 s ± 0.1 s adjustable (usually selected for 30s)
    Hold Burning time0-999.9 s ± 0.1 s, automatic recording, manual timeout
    Flame Height12mm ± 1mm (with height measurement instruments)
    Flame GasButane gas, min. 95% purity
    Temperature Test Range0~1000°C
    Flame Temperature Requirementsfrom 100 °C ± 2 °C liters to 700 °C ± 3 °C time in 23.5 seconds ± 1 seconds
    Standard Copper Block4mm±0.01mm, weight.0.58g±0.01g before drilling. Cu-ETP
    Test processautomatic control, independent convulsions
    Chamber≥0.5m3
    SizeW1100mm×D700mm×H1300mm, exhaust hole Ø100mm
    ControlUsing single chip microcomputer + touch screen control
    Consult standardIEC60695 -11-5,UL746A
    Power Supply300VA ,220V, 48-60Hz
    Display panel languageChinese + English (adjustable

    3

    .Test procedure

    Installation

    * This tester should be placed on a level table

    * Table size no less than 1400W * 900D * (600-800)H mm

    * Distance to the wall: > 200mm

    * Exhaust pipe: diameter of 100mm

    * The test room should be independent room equipped with exhaust system and firefighting device

    * Please prepare gas (butane or purity >95% propane) and gas regulator

    1.1) installs exhaust pipe, tighten the fitting

    1.2) connect wire control box as below

    1.2) connect wire control box as below


    1.3) connect gas



    Attention

    • This equipment should be placed on level ground or table, in an environment of temperature 25±10℃, humidity 50±30%RH.
    • Keep this equipment away from heat or corrosion source.
    • Please keep this tester at least 200mm away from wall, for heat dissipation.
    • Please check and calibrate this equipment once a year. Ensure the performance and precision.
    • Its not allowed to stabbed or scrap touch screen with a sharp object.


    Quality IEC60695-11-5 Flammability Tester Needle Flame Tester for sale
    Send your message to this supplier
     
    *From:
    *To: KingPo Technology Development Limited
    *Subject:
    *Message:
    Characters Remaining: (0/3000)
     
    Inquiry Cart 0

    Friendly Links: www.everychina.com

    Home| Products| Suppliers| Quality Suppliers| Site Map |About Us |Contact Us |Help |关于我们 |联系我们

    Copyright © 2009 - 2024 hardware-wholesale.com. All rights reserved.