PU Loose Wheel Nut Indicator/Wheel Nut indicator/Wheel check collar
Henson loose wheel nut indicator is used widely by the transport
for enhancement and development of fleet safety roadworthiness procedures, daily
walk-round inspection and defect reporting and scheduled
maintenance requirements. Its use allows accurate monitoring for
loose wheel nuts.
Also it helps prevent wheel hub damage or the loss of a road wheel which the wheel nut loosen.
An additional safety feature of the Loose Wheel Nut Indicator is
its heat sensitivity, when higher than normal operational
temperature are reached, the Loose Wheel Nut Indicator will be melt
indicating an imminent bearing failure or braking issues.
More over, the Henson PU material wheel nut indicator can solve the
tolerance problem caused by non-standard hex nut size.
Where to use the wheel check indicator?
The Wheel Check Indicator is fitted to the wheel nut by gripping
the six corners of the hexagon of the wheel nut. When the wheel is
being fitted out the Wheel Check Indicator pointers should be
aligned and set in a recognizable pattern. Should a wheel nut
loosen off, the Wheel Check Indicator has no option but to move
with the nut and so break the recognizable pattern that was set,
thus indicating the wheel nut has begun to rotate and therefore to
This is universal type which fitted for various
trucks/trailers/tank truck etc.,
Suitable Truck models: Heavy truck/ Trailer/Bus/Dangerous goods
Why should we use wheel check Indicators?
1. Provides a simple, visual means of confirming proper wheel
torque in seconds.
2. Reduces your risk of wheel detachment accidents.
(Protect the public, help prevent property and load damage.)
3. Lower your maintenance costs by eliminating unnecessary
4. Quickly identify a hot wheel possibly caused by bearing failure
or brake drag.
5. Decrease equipment downtime.
6. Facilitates official roadside inspections.
7. Clearly visible at night and in bad weather (rain, snow, muddy
8. Easy to install.
9. Cost is only a few dollars per wheel.
10. Pays for itself in just one unnecessary re-torque procedure.
Model No.: HBY27
APPLICATION HEX NUT SIZE: 27/28MM
MELTED POINT: 120 DEGREES CENTIGRADE.
For more information about other size PU wheel nut indicator, PE
wheel nut indicator, Dustite wheel check indicator, PA wheel nut
retainer, or other safety products, pls check our website
Or email us by: email@example.com
Hot line: 4008 527 529
OEM ORDERS ARE ACCEPTED TOO.