Bico Injetor Dodge Journey 2.7 6cc. - Cód. 0280158028
Our promise: All the fuel injectors are 100% tested to meet or
exceed OEM standard
What style are these injectors?
These are called Bosch EV6 Type III. They are the 'long' style,
very commonly used in Ford and GM products. This style of injector
has a terrific reputation for quality, longevity, and spray
pattern. These are the good ones, and they replaced the EV1 body
style with much better technology. According to Bosch, they are
compatible with gasoline and E85, work from 6 to 16 volts, and can
handle fuel pressure up to 8 bar (116 PSI).
What harness connector do they have?
These injectors use the Bosch Minitimer connector. It's also called
Jetronic. Often, this rectangular shaped connector is incorrectly
referred to as an "EV1" connector. EV refers to body style, not
connector type. However, this connector was often used on EV1 style
injectors.
What do these injectors fit?
These injectors came from the factory in '96 to '97 Volvo 850 2.3 5
cyl gas turbo engines, and '98 Volvo S70 and V70 2.4 gas turbo
engines.
These injectors were sold by Ford Racing as 30 lb/hr injectors
commonly used on Mustangs and other modified Fords. They are best
suited to engines with one intake valve per cylinder, such as the
302, the 4.6L 2V, the B-headed 4.6L 4V, most GM LS engines, and
others.
These injectors can be used in some GM engines such as the LS
motors that came in Camaros, Firebirds, Corvettes, and Trucks.
*Check injector dimensions and harness connector type. Often, these
injectors will fit, but may require different harness ends or fuel
rails. I can tell you for sure that they fit Mustang GT V8's from
1986 to 2004 as a direct bolt-in. They were also a direct bolt-in
for many Camaros and Firebirds, and some Corvettes.
Will these injectors fit other applications?
Sure. You can make an injector fit anything with the right parts or
tools. For example, some cars may require different fuel rails.
Many GM trucks will require a different injector harness pigtail.
Some cars might require spacers. But these are the typical EV6 long
style injector used in many factory cars. You can check the exact
dimensions of this injector below.
Do these injectors require tuning?
Yes, unless you are buying them to fit your Volvo listed above. If
you stick these in a Mustang or GM product, you must have some sort
of tuning done to compensate for the increased flow rate.
Logo,for large quantity if you need to paste your own logo ,pls
kindly tel us ,we will ,do that for you.
JINJIANG JUNRI MACHINERY CO.LTD
Address: No 17 ANPING DEVELOP MENT INDUSTRIAL AREA,
QUANZHOU ,FUJIAN CHINA
Contact person:Michelle xu
WHATS APP /MOB :+8613636999880
MAIL:auto1@junri.com
www.junriinjector .com
www.junri.com
WE PRODUCE:
IWP001 IWP003 IWP005 IWP006 IWP022 IWP023
IWP024 IWP025 IWP026 IWP030 IWP039 IWP041
IWP042 IWP043 IWP044 IWP045 IWP046 IWP047
IWP048 IWP049 IWP052 IWP058 IWP064 IWP065
IWP066 IWP067 IWP069 IWP071 IWP092 IWP098
IWP099 IWP101 IWP113 IWP114 IWP115 IWP119 IWP127
IWP131 IWP142 IWP143 IWP144 IWP156 IWP157 IWP158
IWP160 IWP162 IWP168 IWP170 IWP174 IWP176 IWP179
IWP181 IWP182 IWP189 IWP206 IWP210 IWP211 IWP212
IWP218 IWP220 IWP228 IWP238
501.004.02 501.046.02 501.506.02 501.005.02 501.007.02
501.526.02 501.038.92 501.009.02 501.542.02 501.010.02
501.008.02 501.039.02 501.549.02 501.042.02 501.022.02
501.564.02 501.013.02 501.015.02 501.014.02 501.025.02
501.021.02 501.023.02 501.009.02 501.019.02 501.020.02
501.032.02 501.033.02 501.029.02 501.026.02 501.027.02
501.031.02 501.031.02 501.028.02 501.034.02 501.037.92
501.044.92 501.743.02 501.744.02 501.050.02