UV Aging Test Chamber For Aging Test Exterior Simulate Ultraviolet, Rain, High Temperature, High Humidity

UV Aging Test Chamber For Aging Test, simulate ultraviolet, rain, high temperature, high humidity

The fluorescent ultraviolet lamp is used as the light source in the test chamber. Through the simulation of ultraviolet radiation and condensation in natural sunlight, the accelerated weather resistance test is carried out on the material to obtain the results of the material weather resistance.

It can simulate ultraviolet, rain, high temperature, high humidity, condensation, darkness and other environmental conditions in the natural climate. By reproducing these conditions, it can be combined into a cycle, and let it automatically complete the cycle number.

UV aging test samples and performance evaluation:

1. Use:

UV aging test chamber is suitable for all kinds of materials laboratory light source exposure method in the fluorescent ultraviolet lamp method, mainly on the material

In the outdoor changes and new materials to improve the formula and product durability test.

2. Test conditions:

2.1. The test sample is fixed on the test rack. Facing the fluorescent lamp, when the sample rack is not filled, the sample rack should be filled with a blackboard and the inner wall of the test box should be closed.

2.2. Test temperature. The light can be 50, 60, 70℃ three kinds of temperature, preferably 60℃; The temperature of the condensation stage is 50℃, and the tolerance uniformity of temperature is ±3℃.

2.3. The cycle of light condensation can be selected as 4H light and 4H condensation or 8H light and 4H condensation. After 400 ~ 450H of the first light, each row of tubes needs to be replaced with one fluorescent lamp, and the other tubes should compensate for the loss caused by the aging of the tubes according to the lamp cycle and replacement method. This operation mode ensures the service life of each lamp in 1600 ~ 1800H.

2.4. When replacing the lamp tube, dry the water tray and clean it to avoid the formation of scale.

3. Test sample and performance evaluation:

3.1. Evaluation of appearance: the paint is mainly the evaluation of appearance, plastic and rubber can also carry out appearance evaluation when necessary, check the main items are luster, color change, powder, spots, bubbles, cracks and dimensional stability. Should try to use the instrument for quantitative item detection, such as luster, color difference meter.

3.2. Evaluation of mechanical and other properties: tensile strength, elongation, hardness measurement for general rubber materials, impact strength, fracture elongation, tensile strength, bending strength measurement for plastics, if necessary, other performance test items can be specified.

It has the following performance characteristics:

The heating mode is the inner tank heating, fast heating and uniform temperature distribution

The drainage system uses reflux type and U-type sedimentation device to drain water

The distance between the sample surface and the UV lamp plane is 50 mm and parallel

The actual studio consists of test samples and supports to form the inner wall of the box, trapezoidal

Automatic water refill of tank water level

The lid is bidirectional clamshell type, easy to open and close

High quality fixed PU movable wheel is used at the bottom of the test chamber

product description:

Produce Making Details:

Packing/Shipping:

BOTO GROUP LTD. Is a professional manufacturer of environmental test equipment and test service

integrating design, research and development, production, sales, service and construction.The company is located in anting town, jiading district, Shanghai, next to saic Volkswagen motor city. The east China production factory is located in the beautiful kunshan huaxun industrial park.It has offices or liaison offices in major central cities such as tianjin, dongguan,zhuhai, wuhan, chongqing and hefei, which are specially responsible for pre-sales and after-sales service.

The company's products mainly include temperature and humidity testing, weather resistance and mechanics, as well as largescale comprehensive testing. The products are widely used in aviation, aerospace, electrical and electronic, new energy, automobile, communication, chemical industry, medical treatment, new materials and other manufacturing fields, serving universities, scientific research and enterprises.The company in the development of a variety of business at the same time, has always been "focus on research and development design, innovation in production technology, improve and optimize services, adhere to work responsibility" as the purpose.According to the development trend of testing technology and automatic control of all kinds of test instruments at home and abroad, carry out product research and development update at any time, and ensure that most of the important parts of the instrument are importedfrom Europe, America and Japan.

Company took the lead through the IS0 9001 2015 quality system certification, strict control program to finalize the design product from the product of each link, the equipment electric controlling part strictly abide by the CCC quality standards and to ensure that each product all is "high quality, high performance, high standards" perfect show, and at the same time encourage employees to learn the new development trend, innovation constantly develop new patents, Shanghai BoTo so far have been more than 20 national patents.