14DT Blue Fine Wire Drawing Machine With Continuous Annealing Small Slip Rate

HXE-14DT Copper fine wire drawing machine with continuous annealer

I. Application

HXE-14DT Copper Fine wire drawing machine with annealer is used to draw and anneal single bare copper wire from 0.8mm-1.6mm to 0.25mm-0.6mm.

II. Main Technical parameters

1. Usage: Fine copper wire drawing and annealing
2. Inlet diameter: 0.8mm-1.6mm
3. Outlet diameter: 0.25mm-0.6mm
4. Max. mechanical speed: 1500m/min
5. Dies: 14 dies
6. Slip ratio: 15%, Finished capstan slip ratio: 8%
7. Main motor: AC 3 Phase 15KW, Inverter control
8. Take up motor: AC 3 Phase 5.5 kw, Inverter control
9. Take up capacity: 50kg for diameter 300mm iron spool (Customize)
10. Spool size: Diameter 300mm/Max (Customize)
11. Capstans: Ceramic plasma, Drawing capstan 316mm, Final capstan 268mm
12. Capstan lubrication: Water pipe spray
13. Traversing: 110W synchronous motor,transmission by timing belts.
14. Brake: 20KG-M Electromagnetic brake
15. Air pressure: 4-6kg/cm2
16. Annealing pulley: Diameter 120mm
17. Annealing volt: DC50V
18. Annealing current: DC600A
19. Annealing motor power: 30KVA
20. Power source: (customize)
21. Spool control: PID
22. Tension control: Weight balance
23. Machine dimension(L*W*H): 2600mm*1600mm*1900mm, Machine weight:3200kg

III. Components

IV. Advantage and after-self service

A: Advantage

(1). HENGXIE has some world famous parts suppliers, has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). DC. three-section annealing
(4). Our company’s developing process in more than 10 years.

B: After-self service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.

V. Working Condition

5-1. Maximum air consumption 0.3 cubic meter per minute

5-2. Compress air capacity 225L

5-3. Air pressure 0.4Mpa

5-4. Cooling tank capacity 225L

5-5. Steam capacity 2kg/hour

5-6. Steam pressure 0.2-0.3Mpa

VI. Preparation before working

6-1. Check all parts lubrication conditions,

6-2. Check drawing lubrication oil, cooling water, steam, air pressure.

6-3. After checking, connect to power, according to the Electrical drawing, use foot switch, to make the machine operating in low speed (under 4m/s), if no Abnormal, then can begin to work.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.