2000mpm Horizontal Wire Drawing Machine Blue Strong Cast Iron Structure

HXE-26DW Fine copper wire drawing machine

I. Application

HXE-26DW Fine copper wire drawing machine is used to draw single bare copper wire from

0.8-1.65mm to 0.12-0.35mm

II. Components

III. Specifications

1. Inlet wire diameter:0.8-1.65mm
2. Outlet wire diameter:0.12-0.35mm
3. Speed:2000mpm
4. Dies number:26
5. Slip ratio (Area reduction) : No.1 -No.25 / 13%; No.26 / 8%
Elongation, no annealing, 1%-2%, After annealing, 17%-25%. Tensile strength 200-300 MPa
6. Wire drawing mode:horizontal-mode and 4 axes
7. Driver: by dual Inverters control, Brand: Inovance,Chinese famous brand, 15kw+3.7kw.
8. Main motor: 15KW AC 3 phase motor
9. Spooler motor:3.7KW AC 3 phase motor
10. Motor brand: Wan Nan motor, China classical brand
11. Capstan:steel with ceramic coating,
12. Max capstan diameter:242mm
13. Max fix speed capstan:207mm
14. Machine structure:cast iron
15. Reverse system: PID synchronous control spool
16. Transmission: by Flat belts+timing belt
17. Pay-off method: over-head
18. Tension control:weight balance by swing arm
19. Lubrication type: spray, Grade 2.5%-3%, Capacity 40L/min,
Lubrication tank: L1000mm*W500mm*H600mm
20. Bobbin size: 300mm, material steel, 17kg.
21. Take up: shaft type
22. Bobbin capacity:50-60kg/max
23. Brake: Pneumatic brake
24. Power source: customize
25. Machine dimension: L2235mm*W1575mm*H1590mm, Machine weight: 2000KG

IV. Operating order

(1) Opening the unfused switch,the fan start working.

(2) Power switch “ON”,next step is pointing wire through foot switch.

(3) Opening the lubrication liquid switch after part of the wrie went through the dies, let the lubrication liquid spray on the capstans and dies evenly.

(4) The copper wires pass through the pilot round, distribute round, tension lever, arrange round, finally wind on the wind drum, close the stainless steel fold board, and switch on the oil valve for drawing.

(5) Base on the line diameter set up the stretch speed and measure length→reset measure meter→adjust the buffer lever to horizontal position, press the start button, start normal operation

(6) Adjust the width of winding displacement, check again if the oil valve is opened and the oil sprays the drawing area.

(7) The machine will stop atuomactically if wire breaks.The brake light will become red Then repeating above sequence to resume operation.

(8) When the wind bobbin is full, the machine will auto brake, unload the full bobbin and change to another bobbin, wind up then restart the machine.

(9) In case emergency, press the red “emergency stop” button to stop the machine.

(10) Stopping the machine

a. Keep the lubricating oil flow while stop the machine.

b. the wire won’t break if press the stop button of the machine,and the the machine will stops in 30 seconds.

c. Press the start button the machine will restart again.

(11) Attention: If the wire breaks and restart the machine with unchanged bobbin,pls don’t press”meters reset” button. otherwise the machine wouldn't auto stop when the bobbin is full.

V. Advantage and after-sale service

A: Advantage

(1). HENGXIE has some world famous parts suppliers,has special lubrication system for the gears and bearing.
(2). Body and other key components and parts are produced by our own factory , quality is reliable.
(3). Our company’s developing process in more than 10 years.

B: After-sale service

Our company for all machine product, since the shipment date, our company free after sale maintenance service guarantee period is:
(1) 1 year for mechanical part.
(2) 6 month for electrical part.

      Suzhou Hengxie Machinery Co., Ltd was established in 2005, a total professional in drawing machine field, specialized in copper and aluminium wire drawing machines. Located in Suzhou City, very close to Shanghai, we share a convenient transportation and the most successful working environment.

Our 6,700 square meters of land allows producing a wide range of equipment, developing and researching new products. We always strive to introduce the latest international techniques to update our products.

With management concept of “Excellent quality, Reasonable prices, Superior services”, our hope is to not only meet our customers` expectations but to exceed them.

Here are the machines we have: Copper&Aluminium Rod Breakdown machine, Large and intermediate wire drawing machine with online annealer, Intermediate wire drawing machine, Intermediate wire drawing machine with online annealer, Fine wire drawing machine, Fine wire drawing machine with online annealer, Customized fine wire drawing machine with annealer, Super fine wire drawing machine. As long as we talk, we can always meet your detail requirements.

Our market includes both domestic and overseas. Such as Bangladesh, Egypt, Iran, Malaysia, Syria, Algeria, Kenya, Turkey, South Africa, Latin America and so on.

With the concept of “Stable quality and mutual development”, Hengxie welcome all customers from the world to create a sincere cooperation and win-win benefit in the future.