Suitcase high-power Mobile Phone Signal Jammer 7 frequency switch controls the display of remaining battery power Product introduction:
Bochuang spatiotemporal brand portable 4G Mobile Phone Signal
Jammer has recently upgraded the green signal shield, introduced
advanced technology at home and abroad, and continuously upgraded
the communication system. The finished products are carefully
developed according to the wireless communication at home and
abroad, shielding wireless signals such as frequency
differentiation (CDMA / GSM / DCS / 3G / 4G / GPS / WiFi / VHF /
UHF), and the surrounding operation tower has no impact. The
machine adopts single channel power 10W output, which can
effectively shield the above signals within the range of 2-50m
(depending on the strength of the base station signal), so as to
completely interrupt all the above communications within the
shielding range.
Product features:
1. Bochuang spacetime brand this 4G Mobile
Phone Signal Jammer adopts high-speed BGA processing chip with power buffer protection
function
2. Built in high-capacity battery, working continuously for 90
minutes
3. Mains power and DC power supply shall be used at the same time
4. The heat dissipation mode adopts high-speed fan for natural
convection and cold exchange for heat dissipation
5. High gain directional antenna with strong directivity
6. The outer box is made of high temperature resistant, compression
resistant and fall resistant ABS material by injection molding
7. The visible part outside the box is provided with obvious power
switch and residual battery power display
Bochuang spacetime brand portable high-power trolley case 7-way 70W
mobile Signal Jammer up to 150m is a new professional high-power
Signal Jammer. This frequency is especially suitable for mobile
phone signals and RF frequencies.
It is applicable to protecting the safety of important leaders or
VIPs, personal combat,
SWAT team, explosive ordnance disposal team, anti terrorist team,
anti drug team, bomb team, security
Checkpoints, administrative law enforcement, hostage negotiation,
border control
And military security forces.
features:
1. Large coverage, covering CDMA / GSM, WiFi 2.4g/5.8g, gpsl1 and
GPS L2 ~ L5.
2. UWB interference coverage; Continuous interference with 20m ~
3000MHz wireless signal
3. The trolley case is designed to be easy to carry and move;
4. The built-in rechargeable battery can be used for 90 ~ 120
minutes after being fully charged;
5. Manual switch and remote control;
6. Each channel module can be started or closed separately;
7. Effective frequency division to ensure the best interference
effect on signals with different frequencies;
8. Efficient power distribution, minimize power loss and improve
efficiency; The power can be adjusted as required (optional gear
adjustment);
9. Military standard shell, anti throwing, pressure resistant and
durable;
10. AC110-220V / built-in battery power supply (dc27v) / vehicle
power supply (dc27v);
11. Built in high-efficiency cooling fan and heat sink to ensure
stable operation and long service life of the product;
Specifications:
Output interface output frequency
CH1 CDMA/GSM:900~930MHz,
CH2 2.4G wireless network: 2400 ~ 2450MHz
CH3 2.4G wireless network: 2450 ~ 2500mhz
CH4 5.8G WIFI:5725-5850MHz,
CH5 GPS L1:1520~1580MHz
CH6 GPS L2~L5:1100~1300MHz
Frequency range: CDMA / GSM, WiFi 2.4g/5.8g, gpsl1, GPS L2 ~ L5.
Type: trolley box jammer
Output channel: 6 output channels
Transmission power: integrated equipment ≥ 200W,
Each channel ≥ 25W
Parameter shielding range: radius 100-300m (- 75dbm, depending on
the distance of the base station in the open field)
Jammer module 6
Packing: carton
Size: 380 * 305 * 185cm (excluding protrusions)
Antenna 760 Φ thirty-five
Technical parameters:
Net weight 8.5Kg
Including an air box with a total weight of 85 kg
Ambient temperature - 10 º C - + 50 º C
Relative humidity ≤ 80%
Power consumption ≤ 70W
Power input AC100 ~ 240V, DC24V
battery 24V,30AH,built-in backup battery
It can be used for 30 ~ 120 minutes
Antenna parameters omnidirectional antenna, gain: 4 ~ 5dBi
Manual switch control
Equipment chassis metallic paint
Application:
The built-in high-capacity battery and portable backpack design
make the jammer suitable for conference hall, infantry, military
security forces, special police forces, bomb teams, anti-terrorism
forces, anti towing forces, anti riot forces, explosive disposal
teams, checkpoints, hostage negotiation, border control, etc...
Terms and conditions:
Delivery time: the planned delivery time is 3 weeks, and the
delivery starts from the date when the confirmed purchase order is
received and remitted in advance by our bank.
Payment terms: 40% advance payment, 40% after one month, 20% / 100%
advance payment before shipment, PayPal, Wu, etc.
Delivery terms FOB Hong Kong / USA.
The warranty period is 36 months.
Software updates will provide 36 months of free software updates.
Extended warranty period after the fourth year: 5% of the total
warranty period every year.
| brand:Bochuangshikong | Model: bcsk-101s-8 |
| signal system | 工作频率 | 输出功率 |
| 1 | CDMA | 870-960MHz | 41dBm(12W) |
| 2 | DCS | 1800-1880MHz | 40dBm(12W) |
| 3 | 3G | 2110-2170 MHz | 40dBm(12W) |
| 4 | G4 | 2300-2400 MHz | 40dBm(12W) |
| 5 | 4G1 | 2500-2670 MHz | 40dBm(12W) |
| 6 | WIFI | 2400-2500 MHz | 40dBm(12W) |
| 7 | 5G | 3400-3600MHZ | 37dBm(5W) |
| 8 | 5G | 4800-4900MHZ | 37dBm(5W) |
| Power supply mode | External input av110-220 / built-in 24V battery |
| Overall dimension | 380*305*185mm Weight: about 8.5Kg |
matters needing attention
1. The antenna of Bochuang spatiotemporal brand mobile phone signal
Jammer (not required for this model) must be installed according to
the corresponding identification on the host, and then the host
power must be connected.
2. The effective coverage of the shield is a circular area centered
on the shield, so pay attention to correctly select the placement
position of the shield to avoid shielding dead angle; If it is a
directional antenna, the alignment direction can be adjusted
according to the standard sector angle of the antenna.
3. Bochuang spatiotemporal brand mobile phone signal jammer should be placed in a well ventilated place, avoid large objects
as far as possible, and avoid strong electric and magnetic sources
of strong heat sources, so as to ensure shielding effect and stable
operation for a long time.
4. When the shield works, it is not allowed to stack other articles
and disassemble the antenna on it, so as not to affect the
shielding effect and damage the machine.
5. When the mobile phone signal jammer of Bochuang spacetime brand
is not in use, the power supply shall be cut off in time to avoid
affecting the normal use of the mobile phone.
6. When using the shield outdoors, pay attention to dust prevention
and waterproof. Please keep away from corrosive gases and liquids,
and do a good job in dust and moisture prevention, so as not to
accelerate the aging of internal components of the equipment
7. When the used site area is larger than the effective shielding
range, it is recommended to use multiple shields for honeycomb
installation to ensure the shielding effect.
8. Since the power supply and antenna are specially matched with
the host and are debugged one by one during factory debugging,
please try not to use them interchangeably to ensure the best
effect..
9. The warranty period of Bochuang spatiotemporal brand mobile
phone signal jammer is one year and life-long maintenance.
Problem solving
1. Why do some mobile phone signal indicators still have signal
indications when the mobile phone signal jammer of Bochuang
spacetime brand works?
A: This is just an illusion. In fact, at this time, the mobile
phone has been unable to communicate. When you press the pull-out
button at will, you will find that there is no signal indication on
the signal indicator.
2. Will the signal shield interfere with the normal operation of
other electronic equipment?
A: No. This is because the electromagnetic signal sent by the
signal shield completely falls within the working frequency band of
the mobile phone specified by the state, which will only block the
mobile phone communication. And this signal is always in a
relatively static state and will not affect any electronic
equipment.
3. Is Bochuang spatiotemporal brand mobile phone signal jammer harmful to human body and mobile phone?
A: please rest assured that the electromagnetic signal intensity
emitted by the signal shield is very weak. The test data show that
this signal intensity will not cause harm to the human body. At the
same time, the signal shield only blocks the forward signal of the
mobile phone, so that the mobile phone can not contact the base
station, so it will not cause any damage to the mobile phone
itself.
4. Is there any difference in the operating distance between indoor
and outdoor signal shields?
A: Yes. The effective distance (10-40m) of signal shield generally
refers to the indoor distance. In outdoor open areas, the effective
distance of shielding can reach hundreds of meters. It should be
noted that whether used indoors or outdoors, the effective working
distance of the shield is related to the environmental conditions
at that time, such as the distance from the base station, the
location, etc. Therefore, when using the signal shield, this factor
should be fully considered to avoid shielding dead angle, which
will affect the shielding effect.
5. Does Bochuang spatiotemporal brand mobile phone signal jammer
have the same effect on GSM mobile phones and CDMA mobile phones?
A: that's a good question. Because the anti-interference
performance of CDMA mobile phones is much better than that of GSM
mobile phones, the effective shielding distance of signal shield
for CDMA mobile phones is less than that of GSM mobile phones, but
the difference is not very large, about 2-4m. However, users are
also reminded that in some particularly important places, if
necessary, the number of signal shields in the field should be
increased to ensure the shielding effect of CDMA mobile phones.
6. The shell of Bochuang spatiotemporal brand mobile phone signal jammer is hot after working for a period of time. Will it damage the
machine after working for a long time?
A: Thank you for your care. This is a normal phenomenon. In design,
we use the thermal conductivity of aluminum alloy wire drawing
casing to assist heat dissipation. So as to ensure long-term stable
operation. Therefore, the hot casing will not damage the machine.
Desktop 8-way 2g.3g.4g mobile phone signal shield 12W WiFi Wireless Network Signal Jammer
