Small 12 Volt Rechargeable Battery , White 12 Volt Sealed Lead Acid Battery

Characteristics of Motorcycle spare parts manufacturer 12v 6.5Ah lead acid storage battery from China

The most common mistakes made by owners of lead acid batteries

Undercharging - Generally caused by not allowing the charger to restore the battery to full charge after use. Continuously operating a battery in a partial state of charge, or storing the battery in the discharged state results in the formation of lead sulfate (sulfation) on the plates. Sulfation reduces the performance of the battery and may cause premature battery failure.

Overcharging - Continuous-charging causes accelerated corrosion of the positive plates, excessive water consumption and in some cases, damaging temperatures within the battery. Lead acid batteries should be charged after each discharge of more the 50% of its rated capacity and during or after prolonged storage of 30 days or more.

Under-watering - In lead acid batteries water is lost during the charging process. If the electrolyte level drops below the tops of the plates, irreparable damage may occur. Check your battery water level frequently.

Over-watering - Excessive watering of a battery results in additional dilution of the electrolyte, resulting in reduced battery performance. Add water to your battery after it has been fully charged, never when the battery is partially discharged.

Packing and shipping info

1, For "CX" brand, one piece motorcycle battery packed in one "cx" colored inner box and 10 boxes packed in one carton.

2, For OEM, professional box design available for customers request.

3, If you want to protect goods well, we can provide pallet in transportation.

If you have your Designated freight forwarding in China, after delivery we will notice them to arranger shipment. If you haven't, we would like to arrange the whole of shipment for you.

BATTERIES - Wet or Dry Charged

Batteries can be produced as Wet-Charged, such as current automotive batteries are today, or they can be Dry-Charged, such as a motorcycle battery where an electrolyte solution is added when put into service.

WET-CHARGED: The lead-acid battery is filled with electrolyte and charged when it is built. During storage, a slow chemical reaction will cause self-discharge. Periodic charging is required. Most batteries sold today are wet charged.

DRY-CHARGED: The battery is built, charged, washed and dried, sealed, and shipped without electrolyte. It can be stored for up to 18 months. When put into use, electrolyte and charging are required. Batteries of this type have a long shelf life. Motorcycle batteries are typically dry charged batteries.

Chongqing Chuangxiang Power Source Co., Ltd. of Taiwan Maan Shyang Group, which brings advanced technology from Taiwan Maan Shyang Group, is a professional development, research, production, sales in one of the energy plant. It was founded in 2004, located in Tongliang Industrial Park of Chongqing with an area of about 50000 square meters. The company has 26 inside and outside Formation grooves, 9 assembly production lines of battery, including 2 automatic production lines, and annual production capacity is up to 5,000,000 sets of plates and 5,000,000 sets of batteries, which is the most powerful enterprise of production of plate and battery in the southwest region of China. There is an independent plate production workshop, formation workshop, battery assembly workshop, injection molding workshop, etc.. There are nearly 300 people at present in the company, including more than 200 workers, 30 engineers and professional technical personnel, 30 management staff.

Chongqing Chuangxiang Power Source Co., Ltd. has many independent brands, such as "Chuangxiang", "Xiexiang", "Hanwei", specializing in conventional dry charged motorcycle battery, maintenance free motorcycle battery with acid pack, sealed rechargeable maintenance free motorcycle battery, gel motorcycle battery, tricycle battery, generator battery. High capacity, good seal, quick starting, strong charging receiving ability, long service life, good vibration resistance are our products’ main characteristic.

Quality is our company’s culture. The raw material must be strictly inspected ,and quality of the internal control and external control are use of standardized work instruction, especially the key processes, inspection personnel and testing equipment have their function. Qualified goods, to be processed goods and waste stack in different regions in order to analyze and solve the problems in time when issue occurs.

Chongqing Chuangxiang Power Source Co., Ltd. passed the ISO9001 quality management system certification, ISO14001 environmental management system certification, OHSAS18001:2007 occupational health and safety management system certification, and the CE, MSDS, UL and transport certification are also passed. The factory adopts the most advanced production technology of low pollution lead acid battery -battery formation technology, and passed new treatment system of lead acid sewage (waste) water and lead dust and recycling system management of lead acid sewage(waste) water completely solved the problem of heavy metal pollution in lead acid storage battery manufacturing industry. Chongqing Chuangxiang Power Source Co., Ltd. introduces the current world's most advanced battery production equipment and testing equipment, and is the national environmental protection online monitoring standard enterprise.

Taiwan Maan Shyang Group for a long time does business with the German BMW, Piaggio, Sundiro Honda and Wuyang Honda, Yamaha, Qingqi Peugeot, Great River, Loncin, Zongshen, Dayang, Jianshe, Jialing and other well-known enterprises at home and abroad. Chongqing Chuang Xiang Power Source Co., Ttd. is currently supporting Longxin machine, Dajiang machine, Yinxiang motorcycle, and is plate production base of Yuxiang Battery. On the basis of principle of excellence pursuit,continuous innovation, benefit share and sustainable development, we provide customers at home and abroad with first-class products and service.