IEC 60884-1 Power Cord Flexing Tester 10-60rpm Flexing Rate 6 Working Stations
|
IEC 60884-1 Power Cord Flexing Tester 10-60rpm Flexing Rate 6 Working Stations Standard: IEC 60884-1 2013 clause 23.4 and figure 21, UL817, VDE0620 Application: This device is used for test the flexing properties of non-rewirable plugs (terminals) and non-rewirable portable socket-outlets, check the fatigue strength of the power cable and jacket. Test sample: Non-rewirable plugs and non-rewirable portable socket-outlets Plug Socket Tester......
Guangzhou HongCe Equipment Co., Ltd.
|
Power Cord Flexing Tester With Load Bank For Non-Rewirable Plugs And Socket-Outlets
|
Power Cord Flexing Tester With Load Bank For Non-Rewirable Plugs And Socket-Outlets Product Information: This cord flexing test apparatus is designed to perform the required flex endurance testing specified in IEC 60884-1:2022, Figure 21, Clause 23.4. It’s used to precisely evaluates the flexible cable of non-rewirable plugs and non-rewirable portable socket-outlets. Technical parameters: Power......
Sinuo Testing Equipment Co. , Limited
|
IEC60884 Power Cord Flexing Test Apparatus
|
IEC 60884 Figure 21 Plug Socket Test Equipment Power Cord Flexing Tester Standard: IEC 60884-1 2013 ‘Plugs and socket-outlets for household and similar purposes -- Part 1: General requirements’ clause 23.4 and figure 21 Application: This device is used for test the flexing properties of non-rewirable plugs (terminals) and non-rewirable portable socket-outlets, check the fatigue strength of the power......
HJ AUTOMATIC CONTROL TECHNOLOGY CO., LTD
|
IEC 60335-1 Clause 23.3 And 25.14 Power Cord Flexibility Tester / Electrical Appliance Tester
|
... – Part 1: General requirements, IEC60335-2-14 and etc. Application: It is used to check that the supply cord of the small household appliances (such as Coffee pot / electric iron) and lamps is adequately protected against excessive flexing where it...
KingPo Technology Development Limited
|
Power Cord Static Flexing Tester As Per IEC 60227 And IEC 60245-2
|
Product description: Power cord static flexing tester is applicable to standard IEC60227
Advanced Instruments Co.,Limited
|
LCD Electrical Test Equipment Roller Dropping Tester With 100mm Back End Power Cord
|
... with 100mm back-end power cord at the cut, as a specimen, into the drum, according to the provisions of the specimen weight set the number of scrolling, so that the test piece falling impact, and then check the ......
Guangzhou Kinte Electric Industrial Co.,Ltd
|
6 Station Power Plug Tester Flexing Test Swivel Machine FL-1 10~60 Times/Min
|
... for 10,000 flexing at a rate of 60 flexing per minute. Six cables or cords fitted with plugs can be tested simultaneously. The cables are connected to a socket and the tail of the cable is connected to the tester to detect if an internal fault occurs with...
shanghai kerang technology co ltd
|
6 Work Station Flexing Test
|
...Cord Cable Flexing Swivel Testing Machine With 6 Workstations Product Introduction: Plug Cord Flexibility Tester is designed and manufactured according to the standard requirement of IEC 60884-1 figure 21, which can process 10,000 flexing at a rate of 60 flexing per minute. The test equipment has 6 workstations, thus six cables or cords fitted with plugs can be tested simultaneously. Main Technical Parameters: Power......
Guangzhou Shice Equipment Co., Ltd.
|
Glove Box For Lab Research
|
...: glove box for lab research, China, manufacturers, suppliers, factory, custom, wholesale, Power Cord Flexing Test, Table Type Glow Wire Tester, Label Marking Abrasion Machine, IEC 60065:2014 Torque Wrench, Button Switch Endurance Tester, Digimatic Caliper...
Dongguan Kingpo Technology Limited
|
Submit your “iec 60884 1 power cord flexing tester” inquiry in a minute :